Comments on: More battery change pictures

By: Jeroen Meijer

Jeroen Meijer — Wed, 21 Mar 2018 21:09:39 +0000

In reply to Jeroen Meijer. That comes from the EVC.

By: Borut Lesjak

Borut Lesjak — Wed, 21 Mar 2018 20:01:11 +0000

From witch computer canZE gets information “availabe energy kWh” ? it is not from lbc because lbc came with battery and it should have correct information about capacity.
Thank you

By: Jeroen Meijer

Jeroen Meijer — Mon, 19 Mar 2018 21:45:37 +0000

In reply to Borut Lesjak. When the battery has been replaced with a ZE40, the LBCs (inside the battery, of course) and the EVC needs to be reprogrammed (for Arm went from 15/001/0203/0790 to 25/001/0204/0A70). The BCB was not reprogrammed.

By: Borut Lesjak

Borut Lesjak — Mon, 19 Mar 2018 20:07:45 +0000

In reply to Bob Fisch.

what is the corresponding computer computer so that I can go to the dealer and ask him to look in that computer. If Harm could done it than I can do it too.
The information in question is shown in canZE/charging/Available Energy kWh.

Thank you

By: Bob Fisch

Bob Fisch — Mon, 19 Mar 2018 16:33:10 +0000

In reply to Borut Lesjak. CanZE gets the information from the corresponding computer. If the value is wrong in the computer, it is displayed wrongly in CanZE too.

By: Borut Lesjak

Borut Lesjak — Mon, 19 Mar 2018 16:29:12 +0000

Hello
My battery was changed in december 2017.(R240)
In the first picture the GOM show 269 km, my GOM is only 156 km after reset(not peddal reset)
I went back to dealer and he could not help me .
The problem is wrong battery size hardcoded somewhere in the odometer computer.
When the battery is fully charged the canZE shows 25.7 kWh awailable, where it should bearound 38.
Where canZE get this information.
I was looking for this data in dd4all but no luck.

Thank you

By: Rémy

Rémy — Mon, 20 Nov 2017 17:37:50 +0000

We learned that the change operation would be limited to a few dozen customers in France (maybe a hundred).