Comments on: ZE50: a quick update

By: dapprman

dapprman — Sat, 12 Dec 2020 16:20:35 +0000

Is there an idiot’s guide for configuration plus anything in particular you’re looking for?
Plugged in a Konwei KW902, connected to it and can see battery info, though like others I get mainly time outs – you do say in another post it’s possibly a performance issue with the dongle itself. Thing is all I have done is in settings pointed at the dongle, told it the car is a Zoe50 and set Miles as an option – is there anything else I shoudl do? i note someone above mentioned ISOTP, plus I also note there is an unticked check box for logging.

By: Juanmax

Juanmax — Mon, 11 May 2020 08:02:43 +0000

Hi Jeroen, Bob,

first, thanks for this community. Can we please get in touch rather quickly? I have at work a rented Zoe Z50 starting today for this whole week, and will be putting in on a dyno to do a kind of benchmark of the R135. I have a team of 4 engineers and 4 mechanics to help me with it available. We have in the past done several reverse engineering in other vehicles but have not experience/background with the Zoe.

Can we have a small colaboration? We need to know in which pins (I understood that the ZE50 have a gateway) we should sniff to get to the powertrain CAN. We have prosesional tools from Vector to work on the CAN Bus and we can correlaty torques/speeds with the measures from the dyno, so this will help you I gess

So please, can we get somehow in touch in a rather quick way?

Thanks 🙂

By: Gastonlagaffe

Gastonlagaffe — Tue, 05 May 2020 17:52:04 +0000

In reply to Gastonlagaffe. News ?

By: Gastonlagaffe

Gastonlagaffe — Thu, 12 Mar 2020 20:54:02 +0000

Gogogo we trust in you

By: Jeroen Meijer

Jeroen Meijer — Thu, 12 Mar 2020 18:11:12 +0000

In reply to Gastonlagaffe.

Fair dinkum. LBC opens up fine, but not ECU’s are helpful. The CLIP documentation lists a lot of fields that seems to be there to be “compatible” with the older equipment, but lots of them simply do not work. Especially the torque’s are problematic.

I will soon release a new beta where at least things like battery cell temperature and voltages work.

By: Gastonlagaffe

Gastonlagaffe — Mon, 09 Mar 2020 20:37:42 +0000

News???
Im ansious for new posts

By: Gastonlagaffe

Gastonlagaffe — Mon, 02 Mar 2020 13:02:12 +0000

Hello,
i tried the connection too and it works fine
1. time for 30 secs then disconnect
2. time after restart of the ELM for infinite time

By: Jesper

Jesper — Tue, 25 Feb 2020 09:29:31 +0000

I too saw pedal position. Strangely, my phone lost connection to the konnwei kw902 after ~30 seconds and got NaN values. But while it was connected, it worked.

By: Jeroen Meijer

Jeroen Meijer — Sat, 22 Feb 2020 23:21:46 +0000

In reply to Uwe Schmidtmann. Thanks for letting us know!

By: Uwe Schmidtmann

Uwe Schmidtmann — Sat, 22 Feb 2020 19:17:46 +0000

Hi. Just got my Konnwei KW902 BT Dongle and did a quick check on my R110 ZE50. Connection works and the pedal position is shown. Phone is Android…